Loading ...
Loading ...
Loading ...
GETTING TO KNOW YOUR VEHICLE 43
6. If needed, add the provided shim to a lower
half-door pocket to seal the upper half-door to
the roof:
a. Lift upper half-door up and away from lower
half.
b. Clean the bottom of the door pocket.
Remove Upper Half-Door & Clean Bottom Of Door Pocket
c. Slide the shim onto a pencil or similar tool.
d. Remove the paper backing from the adhe-
sive side of the shim and place the shim
with pencil into the pocket.
e. Press the shim firmly to the bottom of the
pocket, and remove the pencil once the
shim is firmly in place.
Press Shim Firmly Into Bottom Of Pocket
f. Replace upper half-door.
NOTE:
If the compression is increased too much on the
front upper corner of the rear doors, deformation
of the seal will occur.
Half-Door Mirror Installation
To install the front door exterior mirrors on the
half-doors, proceed as follows:
1. Locate the wiring harness on the outside of
the front half-door.
Wiring Harness Location
2. Insert the wiring harness firmly into the
connection on the driver’s side exterior mirror.
Connect Wiring Harness To Exterior Mirror
1 — Remove Paper Backing From Shim
2 — Slide Pencil through Hole In Shim
3 — Press Pencil With Shim Into Pocket
1 — Wiring Harness
2 — Exterior Mirror
2
22_JT_OM_EN_USC_t.book Page 43
Loading ...
Loading ...
Loading ...