Loading ...
Loading ...
Loading ...
106 GETTING TO KNOW YOUR VEHICLE
SUNRIDER ® FOR
H
ARD TOP — IF EQUIPPED
The Sunrider® soft top can be used in place of the
Hard Top Freedom Panels for quick and easy
opening of the area above the driver and front
passenger seats.
Sunrider® For Hard Top
To install the Sunrider® soft top, proceed as
follows:
1. Remove both front Hard Top Freedom panels
Ú
page 100.
2. With the help of a second person, set the
Sunrider® top onto the top of the vehicle
making sure to align the holes at the front and
rear of the side rails.
Lower Sunrider® Onto The Vehicle
3. Swing the front frame bracket around the side
of the rail, and insert the door rail attachment
bolt (provided bolt without spacer) from
underneath. Tighten with a #40 Torx head
driver until snug.
Attach Front Door Rail Bolt
4. Insert the rear door rail attachment bolt
(provided bolt with spacer) from underneath.
Tighten with #40 Torx head driver until snug.
Attach Rear Door Rail Bolt
WARNING!
Do not open or close the Sunrider® top while
driving. Operating the top while driving could
cause the driver to lose control of the vehicle.
Failure to follow this warning may result in
serious injury or death.
22_JT_OM_EN_USC_t.book Page 106
Loading ...
Loading ...
Loading ...