Loading ...
Loading ...
Loading ...
GETTING TO KNOW YOUR VEHICLE 35
Store the wire connector in the lower basket of the
door.
Wiring Connector
6. With the door in the open position, remove the
check bolt from the door check attachment on
the body (using a #T40 Torx head driver).
NOTE:
Keep the check arm in the extended position for
easier reinstallation.
Door Check
7. With the door open, lift the door with the help
of another person, to clear the hinge pins from
their hinges and remove the door.
To reinstall the door(s), perform the previous steps
in the reverse order.
NOTE:
The upper hinge has a longer pin, which can be
used to assist in guiding the door into place when
reinstalling. When reinstalling the check arm
attachment bolt, bolt torque should be between
11.76 ft·lb / 16 N·m and 27.9 ft·lb / 38 N·m.
DOOR OFF MIRROR KIT — IF EQUIPPED
If equipped with the Door Off Mirror Kit, exterior
rearview mirrors can be installed on to the upper
body door hinges after the front doors have been
removed.
CAUTION!
Hinge pins can break if overtightened during
door reinstall (Max Torque: 5.88 ft·lb / 8 N·m).
For information on off-road driving tips, see
Ú page 220.
Do not overtighten Torx fasteners. Damage to
the vehicle’s parts will occur.
WARNING!
All occupants must wear seat belts during
off-road operation with doors removed. For
off-road driving tips, see Ú page 220.
Do not store detached doors inside of the
vehicle, as they may cause personal injury in
the event of an accident.
2
22_JT_OM_EN_USC_t.book Page 35
Loading ...
Loading ...
Loading ...