Loading ...
Loading ...
Loading ...
104 GETTING TO KNOW YOUR VEHICLE
5. Remove the Torx head fasteners that secure
the hard top to the vehicle: two along the
interior body side, rearward of the back doors,
followed by the four fasteners along the back
of the vehicle cab using the #T50 Torx head
driver.
Step Five
6. Locate the wire harness on the left rear inside
corner of the vehicle. To access the harness,
remove the plastic cover by pushing the cover
to the side, and sliding it off.
NOTE:
Do not force open; this will break the plastic cover.
Step Six
7. To release the wire harness, pull back on the
red latch (1), then push down on the black
button (2) while pulling the harness out.
Step Seven
8. Remove the hard top from the vehicle. Install
the provided edge protectors along the bottom
edges of the hard top, and place the hard top
on a soft surface to prevent damage.
1 — Body side Torx Head Fasteners
2 — Vehicle Cab Torx Head Fasteners
1 — Red Latch
2 — Black Button
CAUTION!
The removal of the Freedom Top requires four
adults located on each corner. Failure to follow
this caution could damage the Freedom Top.
22_JT_OM_EN_USC_t.book Page 104
Loading ...
Loading ...
Loading ...