Loading ...
Loading ...
Loading ...
GETTING TO KNOW YOUR VEHICLE 39
5. Connect the wiring harness on the lower
half-door to the connection just inside the
vehicle.
NOTE:
For front doors, make sure the wiring harness is
closed completely.
Front Door Wiring Harness
6. Replace wiring access doors.
7. When the half-doors are shipped with the
vehicle, the lower half-doors will have plugs in
the post holes that must be removed prior to
upper half-door installation.
To remove these plugs, proceed as follows:
a. Locate the service hole in the center of each
plug of the lower half-door (two on each
front and rear door).
b. Place a tool (hook tool or trim stick is recom-
mended) in the service hole.
Place Tool Into Service Hole Of Plug To Remove
c. Using the tool, slowly pull upwards from the
center of the plug to remove.
8. Making sure the window on the upper
half-door is completely zipped closed, insert
the upper half-door into the lower half-door by
placing the posts into the post holes.
Lower The Upper Half-Door Into Post Holes
9. Push down firmly on the inside of the upper
half-door until it is fully seated in the lower half.
Push Down To Fully Seat Upper Half-Door
1 — Open Wiring Harness
2 — Closed Wiring Harness
1 — Push Down On Inside Of Upper Half-Door
2 — Fully Seated Upper Half-Door
2
22_JT_OM_EN_USC_t.book Page 39
Loading ...
Loading ...
Loading ...