Loading ...
Loading ...
Loading ...
220 STARTING AND OPERATING
OFF-ROAD DRIVING TIPS
Side Step Removal — If Equipped
NOTE:
Prior to off-road usage, the side steps should be
removed to prevent damage.
1. There are two nuts connecting to the body
side and one bolt connecting to the
underbody on each attachment bracket.
There are four attachment brackets on each
side step.
Fastener Locations (One Side)
2. Remove two nuts and one bolt from the
underside of the vehicle for each of the four
brackets. Repeat for other side of vehicle.
Underside Nuts
3. After all bolts and nuts have been removed,
pull the side step assembly off of the vehicle.
4. To reinstall the side steps align the studs to the
body side holes and fasten all nuts on all four
brackets. Then secure all four bolts to the
underbody. Repeat the reassembly procedure
for the other side.
Bumper End Cap Removal — If Equipped
The end caps on your vehicle’s front bumper can
be removed by following the steps below:
NOTE:
Bumper end caps are removable on steel bumpers
only.
1. Loosen the two bolts that retain the GAWR
bracket (Bolts #1 and #2) to the end cap
using a T45 torx bit screw driver. Do not
remove the bolts.
Bolt #1
22_JT_OM_EN_USC_t.book Page 220
Loading ...
Loading ...
Loading ...