Loading ...
Loading ...
Loading ...
38 GETTING TO KNOW YOUR VEHICLE
Use this QR code to access your
digital experience.
This vehicle may be equipped with
half-doors. To install the
half-doors in the vehicle, follow
the instruction sheet packaged in
the box the doors were received
in. Replacement parts may be purchased through
Mopar® Service.
Half-Door Installation
To install the front or rear half-doors, proceed as
follows:
1. Remove the full doors from the vehicle. For
front door removal, see
Ú
page 30
. For rear
door removal, see Ú
page 33.
2. Locate the upper and lower hinge pins on the
lower half-door, and lower them into the body
hinges on the vehicle.
NOTE:
The upper hinge pin is longer, which can be used to
assist in guiding the door into place during instal-
lation.
Lower Half-Door Hinge Pins
3. Insert the upper and lower hinge pin screws
into the body hinges. Tighten the screws using
a #T50 Torx head driver to 3.8 ft· lb / 5.2 N·m.
4. Attach the cloth strap of the lower half-door to
the metal hook just inside the vehicle.
Cloth Strap Attachment
CAUTION!
Do not close the door before reattaching the
door check to the body. Damage may occur to
the door check.
Do not overtighten Torx fasteners, damage to
the vehicle’s parts will occur.
Hinge pins can break if overtightened during
door install (Max Torque: 6.0 ft· lb/8.1 N·m).
1 — Metal Hook
2 — Cloth Strap
22_JT_OM_EN_USC_t.book Page 38
Loading ...
Loading ...
Loading ...