Loading ...
Loading ...
Loading ...
112 GETTING TO KNOW YOUR VEHICLE
5. Using the provided #T40 Torx head driver,
remove the four Torx head fasteners located
along the interior of the windshield (two on
each side of the header trim).
Step Five
NOTE:
Store all of the mounting bolts in their original
threaded holes and tighten for safekeeping, or in
the fastener bin located below the rear seat.
6. Lower the windshield gently until it contacts
the tie-down bumpers (if equipped).
Step Six
7. Secure the windshield by passing a cinch strap
through the tie-down bumper on either side of
the hood and on the windshield frame. Tighten
the strap to secure the windshield in place.
Adaptive Cruise Control (ACC)/Forward
Collision Warning (FCW) Sensor Protective
Cover — If Equipped
Your vehicle may be equipped with a protective
cover that is to be used whenever the windshield is
folded down in order to protect the ACC/FCW
sensor. To install the cover, follow the instructions
below:
1. Secure the top part of the cover so that it
hinges to the header.
2. Swing the cover down and push on it so that it
covers the opening.
1 — Outer Torx Fasteners
2 — Center Torx Fasteners
1 — Washer Nozzle
2 — Bumper
3 — Tie-Down
CAUTION!
Do Not Overtighten! Damage to the windshield
could result.
22_JT_OM_EN_USC_t.book Page 112
Loading ...
Loading ...
Loading ...