Loading ...
Loading ...
Loading ...
110 GETTING TO KNOW YOUR VEHICLE
3. Swing the frame bracket around the side of the
door frame, and insert the fasteners from
underneath. Tighten with the #T40 Torx head
driver until they are snug, being careful not to
cross-thread the fasteners or overtighten.
Refer to the following table for the appropriate
torque specifications for the door frame
fasteners.
Tighten Fasteners
4. Set the rear door frame pin into the hole on top
of the body side, just behind the rear door
opening.
5. Carefully position the top of the door frame
onto the rear belt rail and the rear of the front
door frame, making sure the rubber seals lay
flat. Ensure the seals are installed correctly to
avoid water leaks.
Step Five
Step Five
6. Insert the fasteners from underneath. Tighten
with the #T40 Torx head driver until they are
snug, being careful not to cross-thread the
fasteners or overtighten. Refer to the previous
table for the appropriate torque specifications
for the door frame fasteners.
FOLDING WINDSHIELD
The fold-down windshield on your vehicle is a
structural element that can provide protection in
some accidents. The windshield also provides
protection against weather, road debris and
intrusion of small branches and other objects.
Target Torque
Specification
For Torx
Fasteners
Maximum Minimum
44.2 in-lb
(5 N·m)
53.1 in-lb
(6 N·m)
35.4 in-lb
(4 N·m)
CAUTION!
Do not overtighten Torx fasteners. You can strip
the fasteners if they are overtightened.
22_JT_OM_EN_USC_t.book Page 110
Loading ...
Loading ...
Loading ...