Loading ...
Loading ...
Loading ...
102 GETTING TO KNOW YOUR VEHICLE
NOTE:
The left side panel must be removed before
removing the right side panel.
1. Fold down the sun visor against the
windshield.
2. Turn the three L-shaped locks on the left side
panel (one at the front, the rear, and outside),
unlocking them from the roof.
Step Two
3. Unlatch the left side header panel latch
located at the top of the windshield.
Step Three
4. Remove the left side panel.
5. Repeat the steps above to remove the right
side panel.
Hard Top Panel(s)
Storage Bag — If Equipped
The Freedom Top panels storage bag allows you to
store your hard top panels. The storage bag
contains two compartments.
Lay the bag for the panels down so the loops and
hooks are facing upward. Unzip the bag and fold
back the outer flap.
NOTE:
Ensure the front panel latch is closed prior to
inserting the panel into the panels bag.
There is a pouch located on the front of the bag
to store the provided hard top edge protectors
that are used when the hard top is not installed
on the vehicle.
1. Insert the left side hard top panel into the bag
with the latches facing upward.
2. Unfold the black panel divider (ensure the
divider is laying flat).
3. Insert the right side Freedom Top panel into
the bag with the latches facing downward.
NOTE:
Ensure the front panel latch is closed prior to
inserting the panel into the bag.
1 — Rear Panel Lock
2 — Front Panel Lock
3 — Outside Panel Lock
1 — Header Panel Latched
2 — Header Panel Unlatched
22_JT_OM_EN_USC_t.book Page 102
Loading ...
Loading ...
Loading ...