Loading ...
Loading ...
Loading ...
GETTING TO KNOW YOUR VEHICLE 103
4. Unfold the outer flap and zip the hard top bag
closed.
Step Four
5. Store the Freedom Top panels bag in a safe
location.
HARD TOP FRONT PANEL(S)
I
NSTALLATION
1. Set the right side panel on the windshield
frame with the locating pin in the front
receiver mounting hole, followed by the left
side panel, making sure there is no overhang.
Make sure that the panels are sitting flush
with the body.
2. Secure the panel(s) using the same steps for
removal in reverse order.
NOTE:
To prevent water leaks, the seals and hard top
panels should be clear of any dust and debris prior
to reinstallation.
REMOVING THE HARD TOP
Use this QR code to access your
digital experience.
1. Remove both front panels
Ú
page 100.
2. Open both front doors.
3. Using the provided #50 Torx
head driver and ratchet, remove the two Torx
head screws that secure the hard top at the
B-pillar (near the top of the front doors).
Step Three
4. If equipped, remove the lower interior soft trim
panel (attached by the hook-and-loop
fastener) by pulling the panel away from the
trim.
Step Four
2
22_JT_OM_EN_USC_t.book Page 103
Loading ...
Loading ...
Loading ...