Loading ...
Loading ...
Loading ...
GETTING TO KNOW YOUR VEHICLE 109
DOOR FRAME REMOVAL
NOTE:
The rear door frames must be removed first,
followed by the front door frames.
1. Using the provided #T40 Torx head driver and
ratchet, loosen the Torx head fasteners
located on the underside of each door hinge
(two per door), and remove the fasteners by
pulling downward.
Step One
NOTE:
The fasteners will not fall out once completely
loose, as they are held in place by design.
Step One
2. Lift the frame upward, removing it from the
vehicle.
Step Two
3. Store the fasteners in a secure location.
4. Repeat the procedure on the front door frame.
DOOR FRAME INSTALLATION
1. Install the front door frame first.
2. Ensure the windshield is in the “up” position.
Carefully place the front door frame in the
rubber seal at the top of the windshield, and
line up the holes for the Torx head fasteners
(two for each door).
WARNING!
Do not drive your vehicle on public roads with
the door and/or door frame(s) removed as you
will lose the protection that they can provide.
This procedure is furnished for use during
off-road operation only.
2
22_JT_OM_EN_USC_t.book Page 109
Loading ...
Loading ...
Loading ...