Loading ...
Loading ...
Loading ...
71
BeforeUse
BasicGuide
AdvancedGuide
CameraBasics
AutoMode
OtherShooting
Modes
PMode
PlaybackMode
SettingMenu
Accessories
Appendix
Index
Screen Brightness
Adjust screen brightness as follows.
Choose [Disp. Brightness], and then
press the [
][ ] buttons to adjust the
brightness.
• For maximum brightness, press and hold the [ ] button for at least one
second when the shooting screen is displayed or when in single-image display.
(This will override the [Disp. Brightness] setting on the [
] tab.) To restore
the original brightness, press and hold the [
] button again for at least one
second or restart the camera.
Hiding the Start-Up Screen
If you prefer, you can deactivate display of the start-up screen normally
shown when you turn the camera on.
Choose [Start-up Image], and then
choose [Off].
Formatting Memory Cards
Before using a new memory card or a card formatted in another device, you
should format the card with this camera.
Formatting erases all data on a memory card. Before formatting, copy images
on the memory card to a computer, or take other steps to back them up.
An Eye-Fi card (=
89) contains software on the card itself. Before
formatting an Eye-Fi card, install the software on a computer.
1 Accessthe[Format]screen.
Choose [Format], and then press the [ ]
button.
2 Choose[OK].
Press the [ ][ ] buttons to choose
[Cancel], press the [
][ ] buttons to
choose [OK], and then press the [
]
button.
3 Formatthememorycard.
To begin the formatting process, press
the [
][ ] buttons to choose [OK], and
then press the [
] button.
Whenformattingisnished,[Memory
card formatting complete] is displayed.
Press the [
] button.
• Formattingorerasingdataonamemorycardonlychangesle
management information on the card and does not erase the data
completely. When transferring or disposing of memory cards, take
steps to protect personal information if necessary, as by physically
destroying cards.
Loading ...
Loading ...
Loading ...