Loading ...
Loading ...
Loading ...
37
Preparing Recording Media
Menus
Table of Contents Index
Removing a CFast card
1 Turn off the camcorder.
• Wait until the ACCESS indicator is off.
2 Slide the CARD OPEN switch in the direction of the
arrow and open the recording media slot cover 햲.
3Push in the CFast card release button to release the
CFast card.
4 Pull the CFast card all the way out and close the
recording media slot cover 햳.
IMPORTANT
• Observe the following precautions while the ACCESS
indicator is on or flashing in red. Failure to do so may result in permanent data loss.
- Do not disconnect the power source or turn off the camcorder.
- Do not open the recording media slot cover.
Inserting and Removing an SD Card
1 Turn off the camcorder.
• Wait until the ACCESS indicator is off.
2 Slide the CARD OPEN switch in the direction of the
arrow and open the recording media slot cover 햲.
3Insert the SD card, with the label facing up, all the way
into the SD card slot until it clicks 햳.
• To remove the SD card, push the SD card once to release
it. When the SD card springs out, pull it all the way out.
4 Close the recording media slot cover 햴.
• Do not force the cover closed if the SD card is not
correctly inserted.
IMPORTANT
• Observe the following precautions while the ACCESS indicator is on or flashing in red. Failure to do so may
result in permanent data loss.
- Do not disconnect the power source or turn off the camcorder.
- Do not open the recording media slot cover.
• SD cards have front and back sides that are not interchangeable. Inserting an SD card facing the wrong
direction can cause a malfunction of the camcorder. Be sure to insert the SD card as described in the
procedure above.
NOTES
• SD cards have a physical switch to prevent writing on the card so as to avoid the accidental erasure of the
card’s content. To write-protect the SD card, set the switch to the LOCK position.
ACCESS indicator Recording media status
On or flashing Accessing the recording media.
Off
A recording media is not inserted or
it is not being accessed.
햲
햳
ACCESS
indicator
햲
햳
햴
ACCESS indicator
Loading ...
Loading ...
Loading ...