Loading ...
Loading ...
Loading ...
Activating/deactivating the seat belt's child
special seat belt retractor
&
WARNING Risk of injury or death if a
seat belt is unfastened while the vehicle
is in motion
If the seat belt is released while the vehicle is
in motion, the child restraint system is no
longer correctly secured. The child seat
safety feature is deactivated and the seat
belt is drawn in a bit by the inertia reel.
It is therefore not possible to engage the seat
belt again.
#
Pull over and stop the vehicle safely as
soon as possible, paying attention to
road and traffic conditions.
#
Activate the child seat safety feature
again and correctly secure the child
restraint system.
When enabled, the special seat belt retractor
ensures that the seat belts of the front
passenger seat and rear seats do not slacken
once the child restraint system is secured.
The seat belts on the following seats are equip‐
ped with a special seat belt retractor:
R
Front passenger seat
R
Rear seats
#
To install a child restraint system: when
installing a child restraint system, always
observe the manufacturer's installation and
operating instructions as well as the informa‐
tion in this Operator's Manual.
#
Pull the seat belt smoothly from the seat belt
outlet.
#
Engage the seat belt tongue in the seat belt
buckle.
#
To activate the special seat belt retrac‐
tor: pull the seat belt out fully and let the
inertia reel retract it again.
When the special seat belt retractor is activa‐
ted, you should hear a ratcheting sound.
#
Push the child restraint system down until
the seat belt sits tightly.
#
To deactivate the special seat belt retrac‐
tor: press the release button of the seat belt
buckle.
#
Hold the seat belt tongue and guide back to
the seat belt outlet.
Installing the LATCH-type (ISOFIX) child
restraint system on the rear seat
Installing the LATCH-type (ISOFIX) child
restraint system on the rear seat
&
WARNING Risk of injury if the rear
bench seat/rear seat and seat backrest
are not engaged
If the rear bench seat/rear seat and seat
backrest are not engaged they could fold for‐
wards, e.g. when braking suddenly or in the
event of an accident.
R
If this is the case, the vehicle occupant
would be forced into the seat belt by the
rear bench seat/rear seat or by the seat
backrest. The seat belt cannot protect as
intended and could result in additional
injury.
54
Occupant safety
Loading ...
Loading ...
Loading ...