Loading ...
Loading ...
Loading ...
#
Turn the headlamp range adjuster to the
position that corresponds to the load condi‐
tion of your vehicle.
Operating the combination switch for the
lights
1
High beam
2
Turn signal indicator, right
3
High-beam flasher
4
Turn signal indicator, left
#
Use the combination switch to activate the
desired function.
High beam
#
To switch on: turn the light switch to the
L or à position.
#
Press the combination switch beyond the
point of resistance in the direction of arrow
1.
When the high beam is activated, the L
indicator lamp for low beam will be deactiva‐
ted and replaced by the K indicator lamp
for high beam.
#
To switch off: move the combination switch
back to its starting position.
High-beam flasher
#
Pull the combination switch in the direction
of arrow 3.
Turn signal lights
#
To indicate briefly: press the combination
switch briefly to the point of resistance in the
direction of arrow 2 or 4.
The corresponding turn signal indicator will
flash three times.
#
To indicate permanently: press the combi‐
nation switch beyond the point of resistance
in the direction of arrow 2 or 4.
Vehicles with Active Lane Change Assist:
R
Indicator operation activated by the driver
can extend for the duration of the lane
change.
R
If the driver indicated immediately before‐
hand but a lane change was not immedi‐
ately possible, the turn signal indicator
may activate automatically.
124
Light and visibility
Loading ...
Loading ...
Loading ...