Loading ...
Loading ...
Loading ...
#
Continue turning cap 1 counter-clockwise
and remove it.
The coolant level is correct:
R
If the engine is cold, up to marker bar 2
R
If the engine is warm, up to 0.6 in (1.5 cm)
over marker bar 2
#
If necessary, add coolant that has been
approved by Mercedes-Benz.
R
Further information on coolant
(/ page 429).
Adding washer fluid to the windshield
washer system
&
WARNING Risk of burns from hot com‐
ponent parts in the engine compartment
Certain components in the engine compart‐
ment can be very hot, e.g. the engine, the
radiator and parts of the exhaust system.
#
Allow the engine to cool down and only
touch component parts described in the
following.
&
WARNING Danger of burns when open‐
ing the hood
If you open the hood when the engine has
overheated or during a fire in the engine
compartment, you could come into contact
with hot gases or other escaping operating
fluids.
#
Before opening the hood, allow the
engine to cool down.
#
In the event of a fire in the engine com‐
partment, keep the hood closed and
call the fire service.
&
WARNING ‑ Risk of fire and injury from
windshield washer concentrate
Windshield washer concentrate is highly
flammable. It could ignite if it comes into
contact with hot engine component parts or
the exhaust system.
#
Make sure that no windshield washer
concentrate spills out next to the filler
opening.
#
Remove cap 1 by the tab.
#
Add washer fluid.
Keeping the air-water duct free
#
Keep the area between the hood and the
windshield free of deposits, e.g. ice, snow
and leaves.
358
Maintenance and care
Loading ...
Loading ...
Loading ...