Loading ...
Loading ...
Loading ...
En
33
Changing the settings
! Effect parameter 2 button lit: Crossfader starts without the sync
mode set. (The sync function is not activated simultaneously when
crossfader starting starts.)
! Effect parameter 3 button lit: Crossfader start function is disabled.
Setting the master output’s attenuator
level
! By default, 0 dB is set.
Press a [HOT CUE] mode, [ROLL] mode or [SLICER]
mode button on the left deck.
! [HOT CUE] mode button lit: 0 dB (no attenuation)
! [ROLL] mode button lit: –3 dB
! [SLICER] mode button lit: –6 dB
Changing the slip mode flashing setting
When the slip mode is on, the buttons that can be operated in the slip
mode (jog wheel indicator, [AUTO LOOP] button, [PLAY/PAUSE f]
button, etc.) flash. This setting can be used to disable the flashing of
these buttons.
! By default, slip mode flashing is enabled.
Press the [SLIP] button on the left deck.
! [SLIP] button lit: Slip mode flashing is enabled.
! [SLIP] button off: Slip mode flashing is disabled.
Setting the [SLIP] button lit/flash
operation
By default, the [SLIP] button lights when the mode switches to the slip
mode and flashes while playback is continuing in the background.
With this setting, the [SLIP] button can be made to flash when Slip mode
is started, regardless of whether or not normal playback continues while
the original rhythm is maintained in the background.
Press the [SLIP] button on the right deck.
! [SLIP] button lit: The [SLIP] button flashes upon entering slip mode.
! [SLIP] button off: The [SLIP] button lights upon entering slip mode
and the [SLIP] button flashes while normal playback is continued
while the original rhythm is maintained in the background.
Changing the demo mode setting
On this unit, the demo mode is set if no operation is performed for
10 minutes under normal usage conditions. This demo mode can be
changed.
! By default, demo mode starts when there is no operation for 10
minutes.
! When any control or button on this unit is operated while in the
demo mode, the demo mode is canceled.
Press the [AUTO LOOP] button on the right deck.
The demo mode setting changes each time the [AUTO LOOP] button is
pressed.
The currently set value is indicated by how the [LOOP 1/2X], [LOOP 2X],
[LOOP IN] and [LOOP OUT] buttons light.
! [LOOP 1/2X] button lights: Demo mode is disabled.
! [LOOP 2X] button lights: Demo mode starts when there is no
operation for 1 minute.
! [LOOP IN] button lights: Demo mode starts when there is no
operation for 5 minutes.
! [LOOP OUT] button lights: Demo mode starts when there is no
operation for 10 minutes.
Changing the velocity curve setting of
velocity sampler mode
Set the velocity curve of velocity sampler mode. You can choose one of
four velocity curves.
! By default, curve 3 is set.
Press the [AUTO LOOP] button on the left deck.
The velocity curve setting changes by each pressing the [AUTO LOOP]
button.
The currently set value is indicated by how the [LOOP 1/2X], [LOOP 2X],
[LOOP IN] and [LOOP OUT] buttons light.
Curve 1
4 BEAT
MIDI
code
Strength which
performance pad is pressed
Min. Max.
Curve 2
4 BEAT
MIDI
code
Strength which
performance pad is pressed
Min. Max.
Curve 3
4 BEAT
MIDI
code
Strength which
performance pad is pressed
Min. Max.
Curve 4
4 BEAT
MIDI
code
Strength which
performance pad is pressed
Min. Max.
Loading ...
Loading ...
Loading ...