Loading ...
Loading ...
Loading ...
En
21
Advanced operation
Domain
Sliced sections 1 to 8
1234 56
78
Section 1
Section 5
Section 3
Section 7
Section 2
Section 6
Section 4
Section 8
3 Press the [PARAMETER] or [PARAMETER]
button.
Set the quantization for the slicer function. The value set for the
quantization switches each time one of the buttons is pressed.
The quantization can be set in 4 ways: 1/8, 1/4, 1/2 and 1.
The length of the loop which is played while the pad is being pressed
can be changed with the “QUANTIZATION” setting. For example, when
“QUANTIZATION” is set to “1”, the entire section assigned to the pad is
played in a loop, and when “QUANTIZATION” is set to “1/2”, only the first
half of the section assigned to the pad is played in a loop.
4 Press and hold one of the performance pads.
When the pad is pressed and held, the sound is played in a loop.
! The length of loop playback differs depending on the quantization
setting.
When the pad is released, the track returns to the position that is playing
in the background.
About slicer mode and slicer loop mode
Slicer mode
When the playback position advances to the end of the range that
has been sliced into 8 equal sections, the range shown on the display
switches to the next 8 sliced sections, and these sliced sections are
assigned to the respective pads, replacing the previously assigned
sections.
12345678
11
2
2
…
345678
Slicer loop mode
When the playback position advances to the end of the range that was
sliced into 8 equal parts, the playback position returns to the beginning
of the range that was sliced into 8 equal parts.
12345678
Using the sampler function
Tracks loaded in the sampler slots of the sampler can be played with the
performance pads.
1 Open the [SAMPLER] panel on the PC/Mac screen
with the mouse operation.
2 Press the [SAMPLER] mode button.
The mode switches to the sampler mode.
3 Press the [PARAMETER] or [PARAMETER]
button.
Switch the sampler bank. The sampler has 4 banks, A, B, C and D, and
each bank has 8 slots.
4 Drag and drop tracks to load them into the
[SAMPLER] panel’s slots with the mouse operation on
the PC/Mac screen.
The sampler settings and loaded tracks are saved.
5 Press a performance pad.
The sound for the slot assigned to the pad that was pressed is played.
! Playback method differs depending on the Serato DJ Pro sampler
mode. For details, see the Serato DJ Pro software manual.
Slot 1 Slot 3Slot 2 Slot 4
Slot 8Slot 5 Slot 6 Slot 7
! When a performance pad is pressed while pressing the [SHIFT]
button, the sound of the slot that is currently playing stops.
Using the cue loop
1 Press the [HOT CUE] mode button while pressing
the [SHIFT] button.
The mode switches to cue loop mode.
2 During playback, press a performance pad.
The loop in point is set at the hot cue slot and loop playback starts.
! The length of the loop at this time is the number of beats set for
auto looping.
The loop in points are assigned to the performance pads as
shown below.
Loop 1
Loop 5
Loop 3
Loop 7
Loop 2
Loop 6
Loop 4
Loop 8
! With the cue loop function, the hot cue point is used as the
loop-in point.
If a performance pad at which a hot cue point is already set is
pressed, loop playback starts from that hot cue point.
3 During loop playback, press the [PARAMETER]
button.
The loop playback length becomes half.
Pressing the [LOOP 1/2X] button obtains the same effect.
Loading ...
Loading ...
Loading ...