Loading ...
Loading ...
Loading ...
9
Set Up Your System
3. Turn the base station on by pressing the On/O button.
The Power LED and Internet LED on the front of the base station light green in
about two minutes.
Your base station is set up.
Arlo Pro Base Station LEDs
See the following list for explanations for green, amber, and blinking LEDs:
Green
The base station
is powered on.
Blinking green
A firmware update
is in progress. DO
NOT TURN OFF THE
BASE STATION OR
CAMERAS.
O
The base station
is powered o.
Green
The base station
is connected to
the Internet.
Amber
The base station is
connected to the
router but did not
get an Internet
connection.
O
The base station is
not connected to
your router.
Green
Cameras are
connected to the
base station.
Blinking green
The base station
is attempting
to sync with a
camera.
Blinking amber
A camera is too
far from the base
station. Signal
strength is weak.
O
No cameras are
detected.
Amber
The base station
is booting.
Power Internet Camera
Blinking green
The base station
is sending or
receiving data
over the Internet.
Loading ...
Loading ...
Loading ...