Loading ...
Loading ...
Loading ...
109
Contents Before Using Getting Started Design Center Layout & Editing
Programmable
Stitch Creator
Quick Reference Alphabetic Index
NOTE:
If you started in Stage 3 by opening a Stage 3 file, you cannot go to Stage 2.
[Color Reduction function]
If you click the Image Tune button in the above dialog, a Image Tune dialog similar to this will display,
and you can reduce the colors of the image data (posterize) or reduce the noise.
With this function, you can apply an even gradation to make the image smoother. You can use Pick
Colors
to select colors easily, even from image data that was taken from a scanner or other device,
and does not have clear outlines.
NOTE:
This operation is done so that the operations in the Cut Out to Line Image dialog can be done, so
the image that results from these operations cannot be saved.
◆ If necessary, scroll and zoom the image.
◆ Select the color(s) that you want to convert into
black. To do this, move the cursor over the
image. The shape changes to . Click on a
color. The color moves to the upper box under
Pick Colors and a appears in the check box
to show that the color is on. You can repeat to
select a total of five colors. If you try to select
more, colors are scrolled down, and the color
that was at the bottom is deselected.
• If you selected a color by mistake, simply click
its check box to deselect it.
◆ Click View to see the effect of your selection.
You can repeat this step after clicking on the
check boxes of the selected colors to toggle
them on/off, or after selecting different colors.
◆ Click OK to confirm.
◆ Click Cancel to exit.
◆ Image Window displays the image
resulting from the current operations.
◆
Tone sets the amount of color reduc-
tion (posterization). The right side
(High) shows the original image. The
farther to the left side (Low) the setting
is made, the greater the amount of
color reduction.
◆ If Noise Reduction is checked, the very
small areas of noise are deleted.
◆
Click
OK
to show the finished image on
the Design Page and on the Cut Out to
Line Image dialog, and close the dialog.
Before you open this dialog, the Pick
Colors that were picked out in the Cut
Out to Line Image dialog are reset.
◆ Click
Cancel to close the dialog.
Image Window
Loading ...
Loading ...
Loading ...