Loading ...
Loading ...
Loading ...
On-screen Messages
66 CP1 Owner’s Manual
Appendix
On-screen Messages
Message Meaning
Are You Sure?
This message is displayed to confirm whether or not you wish to proceed with the
selected operation.
Completed.
This message is displayed when the selected operation has been completed.
Connected USB device is not
supported.
This message is displayed if the USB flash-memory device plugged into the [USB
TO DEVICE] port is not supported by the CP1.
Connecting to USB device...
This message is displayed while the USB flash-memory device plugged into the
[USB TO DEVICE] port is being mounted.
Device number is off.
This message is displayed if the Bulk Dump function cannot be used due to a device
number not having been set.
Device number mismatch.
This message is displayed if the Bulk Dump function cannot be used due to a
mismatch in device numbers.
Error storing user memory.
This message is displayed if an error occurs when storing settings in the User
Memory. As this may indicate that the User Memory has been damaged, you should
contact your Yamaha dealer or a service center (see the back of this booklet) for
assistance.
Executing...
This message is displayed while the CP1 is busy processing data. The instrument
should never be turned off while in this state.
File already exists.
This message is displayed if a file with the same name as the one you are about to
save already exists on the USB flash-memory device.
File is not found.
This message is displayed if no file of the selected type exists.
File path is too long.
The file or directory you tried to access cannot be accessed because the amount of
characters indicating the path is too long.
Illegal file name.
This message is displayed if the file name entered is invalid.
Illegal file.
This message is displayed if the file selected for loading is unsuitable either for use
with the CP1 or for the current mode.
Load? (EXT perf)
This message is displayed to confirm whether or not you wish to load an External
Performance memory (EXTBANK.C1E) from the USB flash-memory device plugged
into the CP1, thus overwriting the current External Performance memory. It is
displayed if a USB flash-memory device with an EXTBANK.C1E file in its root
directory is plugged into the [USB TO DEVICE] port after an External Performance
memory has previously been loaded into the instrument.
Loading... (EXT performance)
This message is displayed while the CP1 is busy loading an External Performance
memory.
Loading... (MEQ&Utility)
This message is displayed while the CP1 is busy loading Master Equalizer and Utility
settings.
Loading... (performance)
This message is displayed while the CP1 is busy loading a User Performance
memory.
Making external memory...
This message is displayed while the CP1 is busy making an External Performance
memory on a USB flash-memory device plugged into the [USB TO DEVICE] port.
MIDI buffer full.
This message is displayed if the amount of MIDI data received is too large to
process.
MIDI checksum err.
This message is displayed if the checksum for received system-exclusive MIDI data
is incorrect.
MIDI data error.
This message is displayed if an error occurs while receiving MIDI data.
No more files can be created.
This message is displayed if no additional files can be created on the USB flash-
memory device.
Loading ...
Loading ...
Loading ...