Loading ...
Loading ...
Loading ...
Using CP1 Performances
28 CP1 Owner’s Manual
Quick Start Guide
4 Press one of the Number buttons, [1] to [16].
With the Performance selection process now complete, the corresponding Memory, Bank, and Number buttons will
stop flashing and stay lit.
NOTE For a list of all Preset Performances, see the Data List booklet.
5 Use the keyboard to play the selected Performance.
Using Knobs 1 to 6 to Change the Sound
Knobs 1 to 6 from the CP1 control panel can be assigned to various parameters from the individual blocks or units
making up each Performance. In specific terms, parameters from each Piano Type and Pre-Amplifier unit, from each
Modulation Effect and Power-Amplifier / Compressor block, and from the Reverb block can be freely assigned to these
knobs, and furthermore, each Performance can have a different set of assignments. You can confirm which parameters
are assigned to each knob on the Performance screen. Here, a number 1 or 2 may be shown at the left of parameter
names, and this indicates whether the parameter in question is from Part 1 or Part 2. For example, if a parameter
assignment were identified as being 1Decay, the corresponding knob would control the Decay parameter (i.e., decay
time) from Part 1. In cases where the assigned parameter affects both Part 1 and Part 2, no such number is displayed.
By turning Knobs 1 to 6, you can change the values set for the corresponding parameters in order to adjust the sound of
the currently selected Performance.
On the first page of the Performance screen, you can also press a knob to toggle on and off display of the current setting
value for its assigned parameter.
TIP
The procedure for using an External Performance memory previously saved to a USB flash-memory device is as follows.
1 Ensure that the External Performance memory is located in the USB flash-memory device’s root directory.
2 Plug the USB flash-memory device into the CP1’s [USB TO DEVICE] port.
The data from the External Performance memory will be automatically loaded into the instrument. For more details, see Using
External Performance Memories from the section, Internal Design of the CP1 (page 22).
3 With the Performance screen displayed, press the [EXTERNAL] button and select a Performance.
To make a selection, follow the procedure described in Selecting a Performance above from Step 3.
Function of Assignable Knobs
assB ammerHO Mid Key-offO
]
OORevSend
PREA:01:[ GrCF and
O[C [
F 3Band
D
XEP 2] T ]
Tr bleeOO
Knob 1 Knob 2 Knob 3 Knob 4 Knob 5 Knob 6
Currently selected Performance
Piano type selected
for Part 1
Piano type selected
for Part 2
Functions assigned to
Knobs 1 to 6
Part number
Performance screen (first page)
Loading ...
Loading ...
Loading ...