CP1 User Manual

Loading ...

Common Settings

CP1 Owner’s Manual

Reference

Common Settings

The Common Settings screen is used to set parameters affecting both Part 1 and Part 2, and it extends over four

individual pages.

First page: Performance name and keyboard playing mode

Editing Sequence: Press the [COMMON] button  Navigate to the first page using the [L PAGE] button  Turn Knobs 1 to 6

Name This field contains the name of the current Performance. Names can be up to 10 characters in length, and

details on how they are set can be found in Setting Names from the Basic CP1 Operations section (see

page 25).

Cursor Knob 2 can be turned to move the cursor within the Name field.

Data Knob 3 can be turned to change the character at the current cursor position.

Setting values:

Lower case letters ............. abcdefghijklmnopqrstuvwxyz

Upper case letters ............ ABCDEFGHIJKLMNOPQRSTUVWXYZ

Numbers and symbols...... 0123456789!"#$%&'()*+,-./:;<=>?@[ ? ]^_`{|} ?

KbdMode

(Keyboard Mode)

This parameter is used to select a keyboard playing mode.

Setting values: layer, split, or zone

layer .............Part 1 and Part 2 both extend over the full length of the keyboard.

split...............Part 1 is used for all keys below that set using the Point parameter; Part 2 is used for the key

set using the Point parameter and all higher keys.

zone .............Four individual zones can be setup extending over sections of the keyboard, with Part1

playing on zone1, Part 2 playing on zone2, and external devices responding to notes from

zone3 and zone4. Each of these zones has a fixed MIDI channel (see page 52), allowing the

CP1 to operate as a master keyboard or to respond to MIDI messages send on these

channels. Accordingly, this mode should be selected whenever exchanging MIDI messages

with external MIDI devices.

NOTE The Utility screen is used to set MIDI-related parameters whenever KbdMode is set to “layer” or “split”.

Point This parameter is used to set the point (or key) at which the keyboard is split between Part 1 and Part 2. As

such, it is displayed only when KbdMode has been set to “split”.

Setting values: C -2 to G8

ZoneEdit The ZoneEdit option is displayed only when KbdMode has been set to “zone”, and if Knob 6 is pressed at

this time, the Zone Edit screen (see page 52) will be displayed.

Loading ...

User Manual - Page 51