Loading ...
Loading ...
Loading ...
Storing Settings
40 CP1 Owner’s Manual
Quick Start Guide
Storing Settings
When you have finished editing a Performance, you can either store it within the CP1’s User Performance memory or
save it in an External Performance memory. Master Equalizer and Utility settings, on the other hand, are stored in User
Memory as part of the instrument’s system settings. Furthermore, the Bulk Dump function can be used to transfer the
Performance currently being edited in the Edit Buffer to a connected MIDI device or DAW application for saving.
NOTE The Common Settings screen can be used to change the name of the Performance currently being edited. For details, see page 51 from the
Reference section.
CAUTION
Whenever you store a Performance within a Performance memory, the content at the selected location will be overwritten. It is wise,
therefore, to regularly create backup copies of important Performances on a USB flash-memory device or the like.
NOTE If you wish to save Performances within an External Performance memory on a USB flash-memory device, ensure that it is plugged into the CP1 in
advance.
1 When you are happy with the Performance being edited, press the [STORE] button.
The Store screen will be displayed.
2 Turn Knobs 5 and 6 to specify a location for storing the Performance in the form of a memory bank and number.
Before selecting an External Performance memory, ensure that the corresponding USB flash-memory device is
plugged into the instrument.
3 Press the [ENTER] button to confirm your selection.
You will be asked to confirm that you wish to proceed.
4 Press Knob 4 (YES [PUSH]) to do so.
When the Performance has been stored, the message “Completed.” will be displayed, followed by the Performance
screen for the stored Performance.
If you do not wish to proceed, press either Knob 5 (NO [PUSH]) or the [EXIT] button when the confirmation screen
from Step 3 is displayed.
CAUTION
The CP1 should never be turned off while the message “Executing...” is displayed on-screen. If this precaution is not observed, the
Performance may not be stored and the corresponding data may be permanently lost.
1 To save modified Master Equalizer or Utility settings, press the [STORE] button.
You will be asked to confirm that you wish to proceed.
2 Press Knob 4 (YES [PUSH]) to do so.
When the settings have been stored, the message “Completed.” will be displayed, followed by the Master Equalizer
or Utility screen.
If you do not wish to proceed, press either Knob 5 (NO [PUSH]) or the [EXIT] button when the confirmation screen
from Step 1 is displayed.
CAUTION
The CP1 should never be turned off while the message “Executing...” is displayed on-screen. If this precaution is not observed, the
settings may not be stored and the corresponding data may be permanently lost.
Storing Performances
Storing Master Equalizer and Utility Settings
USRA 01
tS ore> [CF Grand >] [CP1 Normal] Memory Number
<P[ USH] >>
<
<
< Store MEQ & Utility? YES / NO >>
P[ USH]
Loading ...
Loading ...
Loading ...