Loading ...
Loading ...
Loading ...
Piano
CP1 Owner’s Manual
45
Reference
Parameters from the Pre-Amplifier Unit
Pre-amplifiers are set automatically based on the type of piano selected; however, the following parameters can be used
to modify the way in which each Pre-Amplifier unit affects the corresponding piano sound. Each different preamp type is
configured using a different set of parameters. In the following table, you will find a description of all such parameters in
alphabetic order.
NOTE Output from a pre-amplifier will be muted briefly whenever one of the following tone-control parameters is modified.
• CP80 or CP88 pre-amplifier: Bass, Middle, Treble, or Brill
• 71Rd I, 73Rd I, or 75Rd I pre-amplifier: Bass
• 78Rd II pre-amplifier: Treble
• Dyno pre-amplifier: Bass or Overtone
Editing Sequence: Press and hold the [PRE-AMPLIFIER 1] or [PRE-AMPLIFIER 2] button (for at least one second)
Turn Knobs 1 to 6
On-screen name
(and full name)
Associated piano types Description
BBass
CF 3Band, S6 3Band, CP80,
CP88, 71Rd I, 73Rd I, 75Rd I,
78Rd II, Dyno, 69Wr, 77Wr
This parameter is used to adjust the volume of the low-frequency component.
Brill.
(Brilliance)
CP80, CP88 This parameter is used to adjust the brightness of the sounds produced.
DDepth
(Vibrato Depth)
71Rd I, 73Rd I, 75Rd I, 78Rd II,
69Wr, 77Wr
This parameter is used to adjust the depth of the pre-amplifier vibrato.
G Gain
(Input Gain)
All types This parameter is used to adjust the volume of the signal input into the pre-amplifier.
HHigh
DXEP 1 to DXEP 4 This parameter is used to adjust the volume of the high-frequency component.
HighMid
(High Middle)
DXEP 1 to DXEP 4 This parameter is used to adjust the volume of the high mid-frequency component.
L Low
DXEP 1 to DXEP 4 This parameter is used to adjust the volume of the low-frequency component.
LowMid
(Low Middle)
DXEP 1 to DXEP 4 This parameter is used to adjust the volume of the low mid-frequency component.
MMid
CF 3Band, S6 3Band This parameter is used to adjust the volume of the mid-frequency component.
Middle
CP80, CP88 This parameter is used to adjust the volume of the mid-frequency component.
MidBoost
(Mid Boost)
69Wr, 77Wr This parameter is used to adjust the volume of the mid-frequency component.
MidFreq
(Mid Frequency)
CF 3Band, S6 3Band This parameter is used to adjust the frequency of the mid-frequency component.
NNormal
Dyno This parameter is used to adjust the volume of the mid-frequency component.
OOvertone
Dyno This parameter is used to adjust the volume of the high-frequency component.
P Pk1Freq
(Peak1 Frequency)
CF 2Band, S6 2Band This parameter is used to adjust the central frequency of Peak1 (i.e., Peaking Filter
1).
Pk1Gain
(Peak1 Gain)
CF 2Band, S6 2Band This parameter is used to adjust the volume of Peak1 (i.e., Peaking Filter 1).
Pk2Freq
(Peak2 Frequency)
CF 2Band, S6 2Band This parameter is used to adjust the central frequency of Peak2 (i.e., Peaking Filter
2).
Pk2Gain
(Peak2 Gain)
CF 2Band, S6 2Band This parameter is used to adjust the volume of Peak2 (i.e., Peaking Filter 2).
S Speed
(Vibrato Speed)
71Rd I, 73Rd I, 75Rd I, 78Rd II This parameter is used to adjust the speed of the pre-amplifier vibrato.
TTreble
CF 3Band, S6 3Band, CP80,
CP88, 71Rd I, 73Rd I, 75Rd I,
78Rd II, 69Wr, 77Wr
This parameter is used to adjust the volume of the high-frequency component.
VVolume
All types This parameter is used to adjust the output volume. If set to 100 or greater when
71Rd I, 73Rd I, 75Rd I, 78Rd II, 69Wr, or 77Wr has been set as the part’s piano
type, drive will also be added to the sound.
Loading ...
Loading ...
Loading ...