Loading ...
Loading ...
Loading ...
80
CLP-685, CLP-675, CLP-645, CLP-635, CLP-695GP, CLP-665GP Owner’s Manual
Connections
2. Set SSID, Security, Password and Channel.
2-1. From the “System” menu display, select the highlighted item
in each display as illustrated below.
2-2. Set the SSID, Security, Password and Channel.
Select and enter each value/setting in the same way as in step 3 in
“Manual Setup.” For the setting range for each item, refer to the table on
page 76.
3. Save the setting.
Select “Save >” at the bottom of the Wireless LAN display, then press the
[>] button to start saving.
When saving is done successfully, “Completed” is shown in the display,
and operation returns to the Utility display.
4. Connect the smart device to the instrument (as an access
point).
For instructions on the setup for the smart device, refer to the “iPhone/
iPad Connection Manual” on the website (page 9).
“System” menu display Utility display Wireless LAN display
Loading ...
Loading ...
Loading ...