Loading ...
Loading ...
Loading ...
Assembling the Clavinova
126
CLP-685, CLP-675, CLP-645, CLP-635, CLP-695GP, CLP-665GP Owner’s Manual
5-6. Insert the pedal cord plug into the pedal
connector. Insert the plug so the arrow side
faces front (toward the keyboard).
If the plug will not go in easily, do not force it.
Double-check the orientation of the plug, then try
again.
5-7. Attach the cord holder to the bottom of the
main unit as shown, then clip the holder
around the cord.
6. Rotate the adjuster until it comes in
firm contact with the floor surface.
7. Plug the power cord into the [AC
IN] connector.
8. Attach the headphone hanger.
Attach the headphone hanger using two thin
screws (4 x 10 mm) as shown in the illustration.
CAUTION
To disassemble the unit, reverse the assembly sequence.
Failure to do so can result in damage to the instrument or
personal injury. In particular, if you lay down the main unit
without detaching the pedal box, the pedals will break.
5-6
5-7
Insert the pedal
cord securely
until the metal
part of the cord
plug disappears
from view.
Otherwise, the
pedal may not
function
properly.
Right leg on the bottom of the main unit,
when viewed from front
4 x 10 mm thin screws
Loading ...
Loading ...
Loading ...