Loading ...
Loading ...
Loading ...
Assembling the Clavinova
114
CLP-685, CLP-675, CLP-645, CLP-635, CLP-695GP, CLP-665GP Owner’s Manual
2-2. Align and attach B to the front side of D, E
and F, then align the larger holes on
brackets of B to the screws on D.
2-3. Temporarily secure with six 4 × 14 mm
round head screws.
Insert six screws into the smaller holes on the
brackets.
3. Mount A.
Be sure to place your hands at least 15 cm away from
either end of the main unit when positioning it.
CAUTION
• Be extra careful not to drop the main unit or let your fingers
be pinched by it.
• Do not hold the main unit in any position other than the
position specified above.
4. Attach A.
4-1. Adjust the position of A so that the left and
right ends of A will project beyond E and F
equally (as seen from the rear).
4-2. Secure A using two 6 × 20 mm flat head
screws from the rear.
4-3. Secure A using four 6 × 20 mm flat head
screws from the front.
4-4. Firmly tighten the screws from the upper
parts you temporarily fastened in previous
step 2-3 above (assembly B).
B
2-3
A
F
E
Align the screw holes.
At least 15 cm
4-2
4-3
A
4-1
4-4
Loading ...
Loading ...
Loading ...