Loading ...
Loading ...
Loading ...
Assembling the Clavinova
124
CLP-685, CLP-675, CLP-645, CLP-635, CLP-695GP, CLP-665GP Owner’s Manual
2. Attach the three legs and three leg
beams.
Refer to the diagram below to verify the
orientation of the legs.
2-1. Install and tighten four screws on each leg,
starting with one of the front legs.
2-2. Slide the leg beams over the legs, and attach
them to each of the legs using four thin
screws (4 x 10 mm).
Make sure that the gradually inclined side of the
leg beams faces the inside of the unit as shown.
3. Attach the lyre braces.
3-1. Attach the lyre braces using the four thin
screws (4 x 16 mm).
4. Raise the unit to the standing
position.
Use the front legs as support to raise the unit.
Rear leg
Front leg
Front leg
6 × 40 mm fixing screws
4 × 10 mm
thin screws
The gradually
inclined side
faces the inside.
3-1
4 × 16 mm
thin screws
Loading ...
Loading ...
Loading ...