Loading ...
Loading ...
Loading ...
75
CLP-685, CLP-675, CLP-645, CLP-635, CLP-695GP, CLP-665GP Owner’s Manual
Connections
The following menu is shown only when you connect the USB wireless LAN adaptor to the USB [TO
DEVICE] terminal on this instrument.
Menus marked with * differ in the Wireless LAN Mode parameters between the two modes: “Infrastructure” and “Accesspoint.” The default setting for the Wireless
LAN Mode is “Infrastructure.”
To call up the desired parameter:
Press the [FUNCTION] button several times to select “System” menu, then use the [u]/[d]/[<]/[>] buttons to select the desired
parameter.
[>]
[<]
[>]
[<]
[>]
[<]
[>]
[<]
[>]
[<]
Description
Default
setting
Setting range
Utility Wireless LAN*
(In the
“Infrastructure”
mode)
Select
Network
(Networks) Connect to an access point by
selecting the network.
––
Other SSID Set the SSID. – Up to 32 characters (half
size), alphanumeric
characters, marks
Security Set the Security. None None, WEP,
WPA-PSK (TKIP),
WPA-PSK (AES),
WPA2-PSK (AES),
WPA/WPA2 mixed PSK
Password Set the Password. – Up to 64 characters (half
size), alphanumeric
characters, marks
Connect Connect using the settings in
“Other” display.
––
Detail DHCP Set the wireless LAN detailed
settings. IP Address, Subnet
Mask, Gateway, DNS Server1,
DNS Server2 can be set when
DHCP is set to Off while cannot be
set when DHCP set to On. Use the
[<]/[>] buttons to select each
octet in the entry display, then
enter the value using the [
u]/[d]
buttons. To finalize the setting,
press the [FUNCTION] button.
On On/Off
IP Address 0.0.0.0 0.0.0.0-255.255.255.255
Subnet Mask 0.0.0.0 0.0.0.0-255.255.255.255
Gateway 0.0.0.0 0.0.0.0-255.255.255.255
DNS Server1 0.0.0.0 0.0.0.0-255.255.255.255
DNS Server2 0.0.0.0 0.0.0.0-255.255.255.255
Save Save the settings in the “Detail”
display. Move the highlight to
“Save,” then press the [>] button
to execute the Saving.
––
Wireless LAN
Option
Wireless LAN
Mode
Infrastructure Mode Determines whether the access
point is used for wireless LAN
connection (Infrastructure Mode)
or not (Accesspoint Mode).
Infrastructure
Mode
–
Accesspoint Mode
Initialize Cancel Initialize the settings in the
wireless LAN display. Move the
highlight to “Execute,” then press
the [>] button to execute the
initialization.
Cancel –
Execute
Detail Host Name Set the Host name. [CLP-****]-
[xxxxxx (MAC
address lower
6 figure)]
Up to 57 characters (half
size) including
alphanumeric
characters, the
“_” (underscore) and
“-” (hyphen) character.
Mac Address Display the MAC address of the
USB wireless LAN adaptor.
––
Status Display the error code of network
function.
––
Loading ...
Loading ...
Loading ...