Loading ...
Loading ...
Loading ...
443
Troubleshooting Guide
Under [54: Custom Functions(C.Fn)], if [4: Highlight tone priority]
is set to [1:Enable], ISO 100 cannot be set. If [0:Disable] is set, ISO
100 can be set (p.391). This also applies to movie shooting (p.308).
Under [54: Custom Functions(C.Fn)], if [4: Highlight tone priority]
is set to [1:Enable], the settable ISO speed range will be ISO 200 -
ISO 25600 (up to ISO 12800 for movies) even when [2: ISO
expansion] is set to [1:On]. If [0:Disable] is set for [4: Highlight tone
priority], [H] can be set (p.391). This also applies to movie shooting
(p.308).
Under [54: Custom Functions(C.Fn)], if [4: Highlight tone priority]
is set to [1:Enable], the Auto Lighting Optimizer cannot be set. If
[0:Disable] is set, the Auto Lighting Optimizer can be set (p.391).
Set [z2: Auto Lighting Optimizer] to [Disable]. When [Standard]
[Low] [High] is set, even if you set a decreased exposure
compensation or flash exposure compensation, the image may come
out bright (p.169).
If you shoot at night when the background is dark, the shutter speed
automatically becomes slow (slow-sync shooting) so that both the
subject and background are properly exposed. To prevent a slow
shutter speed, under [z2: Flash control], set [Flash sync. speed in
Av mode] to [1/200-1/60sec. auto] or [1/200 sec. (fixed)] (p.212).
ISO 100 cannot be set.
Expanded ISO speeds cannot be selected.
The Auto Lighting Optimizer cannot be set.
Even if I set a decreased exposure compensation,
the image comes out bright.
When I use the <f> mode with flash,
the shutter speed becomes slow.
Loading ...
Loading ...
Loading ...