Loading ...
Loading ...
Loading ...
D Using the Built-in Flash
206
Set the flash exposure compensation if the brightness of the subject
does not come out as desired (so you want to adjust the flash output) in
flash photography. You can set the flash exposure compensation up to
±2 stops in 1/3-stop increments.
1
Select [Flash control].
Under the [z2] tab, select [Flash
control], then press <0>.
2
Select [Built-in flash settings].
3
Select [2exp. comp.].
4
Set the compensation amount.
If the exposure is too dark, press the
<Z> key (for increased exposure).
If the exposure is too bright, press the
<Y> key (for decreased exposure).
When you press the shutter button halfway, the <y> icon will
appear in the viewfinder.
After taking the picture, cancel the flash exposure
compensation by setting it back to 0.
3 Flash Exposure CompensationN
If [z2: Auto Lighting Optimizer] (p.169) is set to any setting other than
[Disable], the image may still look bright even if a decreased flash
exposure compensation is set.
If flash exposure compensation is set with an external Speedlite (sold
separately, p.209), you cannot set the flash exposure compensation with
the camera (Quick Control or External flash function settings). If it is set
with both the camera and external Speedlite, the Speedlite’s setting
overrides the camera’s.
Loading ...
Loading ...
Loading ...