Loading ...
Loading ...
Loading ...
289
N Shooting Time-lapse Movies
During time-lapse movie shooting, auto power off will not take effect.
Also, you cannot adjust the shooting function and menu function
settings, play back images, etc.
Sound is not recorded for time-lapse movies.
If the next scheduled shot is not possible, it will be skipped. This may
shorten the recording time of the created time-lapse movie.
If the time it takes to record to the card exceeds the interval between
shots due to the shooting functions set or card performance, some of the
shots may not be taken with the set intervals.
If the card does not have enough free space to record the set number of
shots, [Playback time] will be displayed in red. Although the camera can
continue shooting, the shooting will stop when the card becomes full.
If the card has no available capacity, “remaining number of possible
shots” will be displayed in red as [z 0000], and you will not be able to
shoot.
If you connect the camera to a computer with an interface cable and use
EOS Utility (EOS software), set [z5: Time-lapse movie] to [Disable]. If
it is set to [Enable], the camera cannot communicate with the computer.
During time-lapse movie shooting, the lens’s Image Stabilizer will not
operate.
If the power switch is set to <2>, time-lapse movie shooting will be
terminated and the setting will be switched to [Disable].
Even if a flash is used, it will not fire.
Shooting-ready state of the time-lapse movie is canceled and the setting
is switched to [Disable] with the following operations:
• Performing [53: Sensor cleaning] or performing [Clear all camera
settings] under [54: Clear settings].
When time-lapse movie shooting ends, the settings are cleared
automatically, and the camera returns to normal movie shooting.
Loading ...
Loading ...
Loading ...