Loading ...
Loading ...
Loading ...
A Shooting with the LCD Monitor
232
In the <8: x> mode, Live View shooting is not possible.
In the <8: q> mode, the angle of view changes slightly in Live View
shooting because distortion correction is applied.
In the <8: FG> and <v: ABCD> modes, the image area
will be smaller.
For flash photography, the continuous shooting speed will become
slower (max. approx. 2.0 shots/sec.).
Do not point the camera toward an intense light source, such as the sun
or an intense artificial light source. Doing so may damage the image
sensor or the camera’s internal components.
General Live View Shooting Cautions are on pages 261-262.
When flash is used, there will be two shutter sounds, but only one shot
will be taken. Also, the time it takes to take the picture after you press the
shutter button completely will be longer than with viewfinder shooting.
If the camera is not operated for a prolonged period, the power will turn
off automatically after the time set in [52: Auto power off] (p.313). If
[52: Auto power off] is set to [Disable], Live View shooting will end
automatically after 30 min. (Camera power remains on.)
With the HDMI cable, you can display the Live View image on a TV set
(p.357). Note that no sound will be output. If the picture does not appear
on the TV screen, check if the [53: Video system] is correctly set to
[For NTSC] or [For PAL] (depending on the video system of your TV
set).
Loading ...
Loading ...
Loading ...