Loading ...
Loading ...
Loading ...
A Shooting with the LCD Monitor
234
You can display the electronic level by pressing the <B> button
(p.72). Note that if the AF method is set to [u+Tracking] or the camera
is connected to a TV set with an HDMI cable, the electronic level cannot
be displayed.
You can display the histogram by pressing the <B> button. However,
the histogram is not displayed while pressing the shutter button
completely.
When <g> is displayed in white, it indicates that the Live View image
is displayed at the brightness level closely matching that of the actual
image to be captured.
If <g> is blinking, it indicates that the Live View image is displayed at
a brightness that differs from the actual shooting result because of low-
or bright-light conditions. However, the actual image recorded will reflect
the exposure setting. Note that the noise may be more noticeable than
the actual image recorded.
The <g> icon and histogram will be displayed in gray (for your
reference) in the <8: FG> modes, when Multi Shot Noise
Reduction is set, when flash is used, or when bulb exposure is used. The
histogram may not be properly displayed in low- or bright-light
conditions.
The <
g
> icon will also be displayed in gray in the <
v: ABCD
>
modes. The histogram will not be displayed.
Do not hold the camera in the same position for long periods of time.
Even if the camera does not feel too hot, prolonged contact with the same
body part may cause skin redness or blistering due to low-temperature
contact burns. Using a tripod is recommended for people with circulation
problems or very sensitive skin, or when using the camera in very hot
places.
Loading ...
Loading ...
Loading ...