Loading ...
Loading ...
Loading ...
261
P Multiple ExposuresN
For multiple-exposure shooting, the settings will be automatically
switched to [Disable] for the following: all the items of [z1: Lens
aberration correction], [z2: Auto Lighting Optimizer], and [z3:
Highlight tone priority].
If [z3: Picture Style] is set to [Auto], [Standard] will be applied for
shooting.
With [Additive] set, the noise, irregular colors, banding, etc. of the image
displayed during shooting may look different from the multiple-exposure
image recorded in the end.
With multiple exposures, the more exposures there are, the more
noticeable the noise, irregular colors, and banding will be.
If [Additive] is set, the image processing after taking the multiple
exposures will take time. (The access lamp will light up longer.)
If you perform Live View shooting with [Additive] set, the Live View
function will stop automatically when the multiple-exposure shooting
ends.
If the number of multiple exposures is less than the number of
continuous shots set with <q> (Self-timer: Continuous), the multiple
exposure shooting will end after the number of exposures set with [No.
of exposures] is taken.
In step 7, the brightness and noise of the multiple-exposure image
displayed during Live View shooting will be different from those of the
final multiple-exposure image recorded.
Doing any of the following will cancel the multiple-exposure shooting:
Setting the power switch to <2>, replacing the battery, replacing the
card, or switching to movie shooting.
During multiple-exposure shooting, [Clean nowf] or [Clean
manually] under [54: Sensor cleaning] cannot be selected.
While shooting, if you switch to a Basic Zone mode or to <w> or <x>,
the multiple-exposure shooting will end.
If you connect the camera to a computer, multiple-exposure shooting will
not be possible. If you connect the camera to a computer during
shooting, multiple-exposure shooting will end.
Loading ...
Loading ...
Loading ...