Loading ...
Loading ...
Loading ...
137
S Selecting the AF Area and AF Point
You can manually select the AF point or zone.
1
Press the <S> or <B> button
(9).
X The AF points will be displayed in the
viewfinder.
In the Zone AF mode or Large Zone
AF mode, the selected zone will be
displayed.
2
Select an AF point.
The AF point selection will change in
the direction you tilt <9>. If you
press <0>, the center AF point (or
center zone) will be selected.
You can also select a horizontal AF
point by turning the <6> dial and
select a vertical AF point by turning
the <5> dial.
In the Zone AF and Large Zone AF
modes, turning the <6> or <5>
dial will change the zone (in a looping
sequence for Zone AF).
Selecting the AF Point Manually
When you keep holding down the <Q> button and turn the <6> dial,
you can select an AF point in vertical direction.
When [8C.Fn II-11: Initial AF pt, AI Servo AF] is set to [Initial
AF pt selected] (p.484), you can use this method to manually select the
AI Servo AF’s initial position.
When you press the <S> or <B> button, the LCD panel displays the
following:
• Single-point Spot AF and Single-point AF: SEL (Center), SEL AF
(Off center)
• Zone AF, Large Zone AF, and Automatic selection AF: AF
Loading ...
Loading ...
Loading ...