Loading ...
Loading ...
Loading ...
178 PSR-A3000 Owner’s Manual
As convenient as the Registration Memory buttons are, there may be times during a performance when you want to
quickly switch between settings. The convenient Registration Sequence function lets you call up the eight setups in
any order you specify, by simply using the TAB [E][F] buttons (in the Main display) or the pedal as you play.
1 If you intend to use a pedal or pedals to switch the Registration Memory number,
connect the optional pedals to the appropriate FOOT PEDAL jacks.
For instructions, refer to page 93.
2 In the REGISTRATION BANK display, select the desired Bank to be programmed.
3 Call up the operation display.
[FUNCTION] TAB [E] MENU 1 [C] REGIST SEQUENCE/FREEZE TAB [E] REGISTRATION
SEQUENCE
4 If you use a pedal, specify here how the pedal will be used—to advance or to reverse
through the sequence.
Use the [B] or [C] button to select the pedal for advancing or reversing through the Registration Sequence. For
example, if two pedals are connected, Pedal 1 is used for advancing while Pedal 2 is used for reversing. Note
that the pedal settings here (other than OFF) will take priority over the settings in the FOOT PEDAL display
(page 191). If you want to use the pedal for a function other than Registration Sequence, make sure to set this
to OFF.
5 Program the Sequence order, from left to right.
Press one of the REGISTRATION MEMORY [1]–[8] buttons on the panel, then press the [6 ] (INSERT)
button to input the number.
Calling Up Registration Memory Numbers in Order (Registration Sequence)
4
6
7
Indicates the name of the currently selected
Registration Memory Bank.
Indicates the Registration
Memory numbers, in the order
of the current Registration
Sequence.
Loading ...
Loading ...
Loading ...