PSR-A3000 User Manual

Loading ...

164 PSR-A3000 Owner’s Manual

2 DELETE

You can delete the data of the specified channel in the Song. Select the channel whose data to be deleted by

using the [1 ]–[8 ] buttons, then press the [D] (EXECUTE) button to carry out the operation.

3 MIX

This function lets you mix the data of two channels and place the results in a different channel. It also lets you

copy the data from one channel to another.

4 CHANNEL TRANSPOSE

This allows you to transpose the recorded data of individual channels up or down by a maximum of two

octaves in semitone increments.

NOTE Make sure not to transpose channels 9 and 10. In general, Drum Kits are assigned to these channels. If you transpose the channels of Drum Kits, the instru-

ments assigned to each key will be changed.

[2 ]/

[3 ]

SOURCE 1 Determines the MIDI channel (1–16) to be mixed. All MIDI events of the

channel specified here are copied to the destination channel.

[4 ]/

[5 ]

SOURCE 2 Determines the MIDI channel (1–16) to be mixed. Only note events of the

channel specified here are copied to the destination channel. Besides the

values 1–16, there is a “COPY” setting that allows you to copy the data

from Source 1 to the destination channel.

[6 ]/

[7 ]

DESTINATION Determines the channel into which the mix or copy results will be placed.

[F] CH 1–8/CH 9–16 Toggles between the two channel displays: Channels 1–8, and Channels 9–

16.

[G] ALL CH To simultaneously set all channels to the same value, adjust the Channel

Transpose for one of the channels while holding down this button.

Loading ...

User Manual - Page 164