Loading ...
Loading ...
Loading ...
170 PSR-A3000 Owner’s Manual
11
Turn Chord Match of each pad On or Off by using the [5 ]–[8 ] buttons.
If the Chord Match parameter is on for the selected pad, the corresponding pad is played back according to the
chord specified in the chord section of the keyboard generated by turning [ACMP] on, or specified in the LEFT
part of the keyboard generated by turning [LEFT] on (when turning the [ACMP] off).
12
Press the [D] (NAME) button, then enter the desired name for each Multi Pad.
13
If you want to record other Multi Pads, repeat steps 4–12.
14
Press the [I] (SAVE) button to save the Multi Pad, then save the Multi Pad data as a Bank
containing a set of four Pads.
NOTICE
The edited Multi Pad data will be lost if you select another Multi Pad Bank or turn off the power to the instrument without carrying out the
Save operation.
Multi Pad—Step Recording via MIDI
Step Recording can be carried out in the EDIT page. After selecting a Multi Pad in step 4 on page 169, press the
TAB [ F] button to select the EDIT page.
The EDIT page indicates the Event list, which lets you record notes with absolutely precise timing. This Step
Recording procedure is essentially the same as that for Song Recording (pages 152–155), with the exception of the
points listed below:
• There is no LCD button for selecting channels, since Multi Pads contain data for only a single channel.
• In the Multi Pad Creator, only channel events and System Exclusive messages can be entered. Chord and Lyrics
events are not available. You can switch between the two types of Event Lists by pressing the [F] button.
You can manage (rename, copy, paste and delete) your created Multi Pad Bank and each of the Multi Pads
belonging to the Bank. For instructions on managing the Multi Pad Bank file, refer to page 27. This section covers
how to manage each Multi Pad.
1 Select the Multi Pad Bank containing the Multi Pad to be edited.
Press the MULTI PAD CONTROL [SELECT] button to call up the Multi Pad Bank Selection display, use the
TAB [E][F] buttons to call up “PRESET,” “USER” or “USB” (when USB flash drive is connected), then use
the [A]–[J] buttons to select the desired Multi Pad Bank.
NOTE If you select a Preset Multi Pad Bank then edit the Multi Pads, save your edits to “USER” or “USB” (when USB flash drive is connected) as a User Bank.
2 Press the [7 ] (EDIT) button of MENU 1 to call up the MULTI PAD EDIT display.
3 Select a particular Multi Pad to be edited by pressing any of the [A], [B], [F] and [G]
buttons.
Editing Multi Pads
Loading ...
Loading ...
Loading ...