PSR-A3000 User Manual

Loading ...

PSR-A3000 Owner’s Manual 119

Voices

 VOLUME/ATTACK Page

 EFFECT/EQ Page

Same parameters as in the VOICE SET “EFFECT/EQ” page explained on page 116, except that PANEL

SUSTAIN is not available for the Organ Flutes Voices.

[1 ] VOLUME Adjusts the overall volume of the Organ Flutes. The longer the graphic bar,

the greater the volume.

[2 ]RESP.

(Response)

Affects both the attack and release (page 116) portion of the sound, increas-

ing or decreasing the response time of the initial swell and release, based on

the FOOTAGE controls. The higher the value, the slower the swell and

release.

[3 ] VIBRATO

SPEED

Determines the speed of the vibrato effect controlled by the Vibrato On/Off

([F]/[G] buttons) and Vibrato Depth ([H] button).

[4 ] MODE The MODE control selects between two modes: FIRST and EACH. In the

FIRST mode, attack (percussive sound) is applied only to the first notes

played and held simultaneously; while the first notes are held, any subse-

quently played notes have no attack applied. In the EACH mode, attack is

applied equally to all notes.

[5 ]–

[7 ]

4’, 2 2/3’, 2’ These determine the attack sound volume of the Organ Flutes Voice. The 4’,

2-2/3’ and 2’ controls increase or reduce the volume of attack sound at the

corresponding footages. The longer the graphic bar, the greater the attack

sound volume.

[8 ] LENGTH Affects the attack portion of the sound producing a longer or shorter decay

immediately after the initial attack. The longer the graphic bar, the longer

the decay.

Same as the

FOOTAGE page.

Loading ...

User Manual - Page 119