PSR-A3000 User Manual

Loading ...

PSR-A3000 Owner’s Manual 117

Voices

2 DSP

3 EQ

Determines the Frequency and Gain of the low and high EQ bands. Use the [2 ]–[4 ] buttons for the

low EQ band, and the [5 ]–[7 ] buttons for the high EQ band.

 HARMONY/ARP Page

Same as the display called up via [FUNCTION]  TAB [E] MENU 1  [B] HARMONY/ARPEGGIO

(pages 106–107), with the exception of the following points:

•The details set via the [7 ] (DETAIL) buttons are shown on the top of the display.

•The [D] (COMPARE) and [I] (SAVE) buttons are available (see steps 4–5 on page 113).

Disabling Automatic Selection of Voice Sets (Effects, etc.)

Each Voice is linked to its default VOICE SET parameter settings. Usually these settings are automatically called

up when a Voice is selected. However, you can also disable this feature by the operation in the relevant display as

explained below. For example, if you want to change the Voice yet keep the same effect, set the EFFECT parameter

to OFF (in the display explained below).

1 Call up the operation display.

[FUNCTION]  TAB [E] MENU 1  [F] VOICE SET FILTER

2 Use the [A]/[B] buttons to select a keyboard part.

[1 ]/

[2 ]

CATEGORY Selects the DSP effect category and type. Select a type after selecting a cat-

egory.

[3 ]/

[4 ]

TYPE

[6 ] VARIATION

ON/OFF

Turns the DSP Variation on or off for the selected Voice. This setting can

also be made from the VOICE EFFECT [DSP VARI.] button on the panel.

[5 ]/

[7 ]

DETAIL Calls up a detailed setting display. Press the [5 ] button for editing the

standard parameter value, and the [7 ] button for editing the Variation

parameter value.

[2 ]

–[4 ]

PARAMETER Selects the DSP variation parameter to be set.

[5 ]

–[6 ]

VALUE Adjusts the value of the DSP variation parameter.

Loading ...

User Manual - Page 117