PSR-A3000 User Manual

Loading ...

134 PSR-A3000 Owner’s Manual

Editing Data for Each Channel (CHANNEL)

You can edit recorded data for each channel of the current Section selected on the BASIC page or via the panel

buttons. The instructions below apply to step 5 of the Basic Procedure on page 125.

1 In the CHANNEL page, use the [A]/[B] buttons to select the edit menu.

1 QUANTIZE

Same as in the Song Creator (page 163), with the exception of the two additional available parameters below.

2 VELOCITY CHANGE

Boosts or cuts the velocity of all notes in the specified channel, according to the percentage specified here.

3 BAR COPY

This function allows data to be copied from one measure or group of measures to another location within the

specified channel.

4 BAR CLEAR

This function clears all data from the specified range of measures within the selected channel.

5 REMOVE EVENT

This function lets you remove specific events from the selected channel.

2 Use the [1 ]/[2 ] (CHANNEL) buttons to select the channel to be edited.

The selected channel is shown at the upper left of the display.

3 Use the [4 ]–[8 ] buttons to edit the data.

4 Press the [D] (EXECUTE) button to actually enter the edits for each display.

After the operation is completed, this button changes to “UNDO,” letting you restore the original data if you

are not satisfied with the results of the edit. The Undo function only has one level; only the previous operation

can be undone.

NOTICE

The edited Style will be lost if you change to another Style or turn off the power to the instrument without carrying out the Save operation

(step 7 on page 126).

[4 ] TOP Specifies the first (TOP) and last (LAST) measures in the region to be cop-

ied.

[5 ]LAST

[6 ] DEST Specifies the first measure of the destination location, to which the data is to

be copied.

Eighth notes with swing

Sixteenth notes with swing

Loading ...

User Manual - Page 134