Loading ...
Loading ...
Loading ...
30
Panel Lock
The Panel Lock function enables you to lock the cooktop
to prevent it from being switched on accidentally.
Note: If one of the cooking positions is switched on, you
will not be able to activate the Panel Lock function.
Activation
The cooktop must be switched on.
Touch and hold the 1 symbol for approx. 4 seconds.
The
1 symbol will light up.
The Panel Lock is now activated. The cooktop is locked.
Deactivating
The cooktop must be switched on.
Touch and hold the
1 symbol for approx. 4 seconds.
The
1 symbol will light up.
The Panel Lock is now deactivated. The cooktop is
unlocked.
Automatic Panel Lock
This function automatically activates the Panel Lock
whenever the cooktop is switched off.
Activating and deactivating
You can find out how to activate the automatic Panel
Lock in the section entitled ~ "Basic Settings"
Note: To deactivate the automatic Panel Lock, touch
and hold the 1 symbol for approx. 4 seconds.
Pause function
When the Pause function is activated, the settings you
have selected appear in the display. No power level is
used and the cooking times you have set are stopped.
If the Kitchen Timer or Stopwatch Timer has been
activated, it will continue running. If the Pause function
has been activated, the timer duration cannot be
changed.
The Pause function has no effect on the main switch. You
can switch the cooktop off at any time.
Activation
Touch the
a symbol to pause. The cooktop will be
locked for 30 minutes. You can now clean the surface of
the touchscreen display, for example, without altering the
settings.
Note: The
a symbol will only be displayed in the
function bar, if cooking has been started.
Deactivating
The cooktop will switch off automatically after
30 minutes.
To switch the function off and resume cooking before
30 minutes have elapsed, touch the
< symbol and then
the 8 symbol to confirm.
Note: If you move the cookware across the cooking
surface while the function is activated, the settings may
all be lost.
Automatic Shutoff
If a cooking position is in operation for a long time and
none of the settings are changed, the automatic safety
switch-off function is activated.
This stops the cooking position from heating up. A
message will appear on the display.
Touch the 8 symbol. The cooking position settings can
now be reconfigured.
The point at which the automatic safety switch-off
function is activated depends on the power level that has
been set (after 1to 10 hours).
Basic Settings
The appliance has various basic settings. You can adapt
these settings to your personal requirements.
Settings Description and options
’
Brightness You can change the brightness of the touchscreen display.
Start screen You can choose whether or not you want the brand logo to be displayed
when you switch on the cooktop.
Sounds You can configure the type, volume and length of the signal tones you want
the appliance to sound.
SapphireGlow™ function Specify whether or not you want to use the SapphireGlow™ function.
MyZone™ - power levels You can change the default power levels of the cooking areas for the mode
"My Zone - Dynamic cooking for one item of cookware".
CAL Cooking sensor calibration Set your height above sea level to adjust the boiling point.
Cooking sensor paring Connect the wireless cooking sensor to the cooktop.
Loading ...
Loading ...
Loading ...