Loading ...
Loading ...
Loading ...
21
▯ If the silicone patch comes off, replace it with a new
one.
Attaching the wireless cooking sensor
Place the cooking sensor squarely onto the silicone
patch.
Notes
▯ Make sure that the silicone patch is completely dry
before attaching the cooking sensor.
▯ Fill the pan so that the contents reach high enough to
cover the cooking sensor's silicone patch.
▯ To prevent overheating, do not attach the cooking
sensor to other hot cookware.
▯ Remove the cooking sensor from the saucepan after
cooking. Store it in a clean, safe place away from
sources of heat.
▯ You can use up to three cooking sensors at the same
time.
Connecting the wireless cooking sensor to the control
panel
To connect the wireless cooking sensor to the control
panel, follow the instructions below:
1.
Touch the " symbol on the main screen.
2.
Select the Cooking sensor pairing option and then
touch the 8 symbol to confirm.
3.
Briefly touch the ¨ symbol on the wireless cooking
sensor within the next 30seconds.
After a few seconds, the result of the connection
between the cooking sensor and the control panel will
appear on the display.
Then touch the 8 symbol to confirm.
4.
To connect a different cooking sensor, touch the 8
symbol. To return to the basic settings, touch the 9
symbol.
The Cooking Sensor mode is made available once the
cooking sensor has been connected to the control panel
correctly.
Notes
▯ If there is a fault with the cooking sensor, the
connection may not be established correctly for the
following reasons:
▯ Bluetooth
®
communication error.
▯ The symbol on the cooking sensor was not pressed
within 30seconds.
▯ The battery in the cooking sensor no longer has a
charge.
Reset the cooking sensor and repeat the connection
procedure.
▯ If there are problems with the connection due to a
transmission error, repeat the connection procedure.
If the display continues to indicate a connection error,
contact Customer Support.
Resetting the wireless cooking sensor
1.
Touch and hold the ¨ symbol on the cooking sensor
for 8-10seconds.
While you are doing this, the cooking sensor's LED
indicator will light up three times. When the LED lights
up for the third time, it will start to reset the cooking
sensor. Take your finger off the symbol when this
happens.
When the LED switches off, this means that the
wireless cooking sensor has been reset.
2.
Repeat the connection procedure.
Cleaning
Do not clean the wireless cooking sensor in the
dishwasher.
Wireless cooking sensor
Clean with a damp cloth. Never put in the dishwasher,
never get wet.
If the wireless cooking sensor is not used, remove it from
the cookware and keep it in a clean, safe place and not
near heat sources.
Silicone patch
Clean and dry before attaching to the wireless cooking
sensor. Suitable for dishwashers.
Note: Do not leave utensils with the silicone patch in
soapy water for long periods of time.
Cooking sensor window
The sensor window must always be clean and dry.
Proceed as follows:
▯ Remove dirt and oil splatters regularly.
▯ For cleaning, use a soft cloth or Q-tips and window
cleaner.
Notes
▯ Do not use abrasive cleaning products such as
scouring pads, scrubbing brushes or cream cleaners.
Loading ...
Loading ...
Loading ...