Loading ...
Loading ...
Loading ...
AGRAS MG-1P SERIES User Manual
54
© 2018 DJI All Rights Reserved.
Updating the Firmware
Users can update the rmware in the DJI Assistant 2 for MG. The DJI MG app can also be used
to update the firmware of both the aircraft and remote controller, if using a firmware version of
01.04.0320 or above. Follow the instructions below.
1. Power on the remote controller and the aircraft. Ensure that the remote controller has access to
the Internet.
2. Connect the USB-C port on the remote controller to the Micro USB port on the aircraft via a
USB-C OTG cable and a Micro USB cable.
3. There will be a prompt on the lower right corner in the DJI MG app if there is new rmware. Tap
the text to enter rmware page.
4. Select the desired rmware and tap Update to enter rmware information page.
5. Tap Download XXX (XXX indicates the rmware version) to download the rmware package for
all the devices.
6. When the download is complete, tap Update XXX under each device to enter the update page
for the corresponding device, then tap Install and wait for the update complete.
7. After successfully completing the update, restart the remote controller and the aircraft manually.
Aircraft Status Indicators Description
Blinking Patterns Description
Blinking Red, Green and
Yellow
Self-checking
×4 Blinking Yellow for 4 times Warming up
Slowly Blinking Yellow A-mode or P-mode (no GNSS)
Slowly Blinking Green P-mode (GNSS)
Alternately Blinking Blue
and Green
The aircraft is using RTK data for positioning.
Rapidly Blinking Green
The aircraft brakes and hovers to enter obstacle
avoidance mode when an obstacle is detected.
Solid Red
System error. Restart the aircraft, if still not working,
contact DJI Support or a DJI authorized dealer.
Alternately Blinking
Red and Yellow
Abnormal compass data, compass calibration
required
Rapidly Blinking Red
Several Times
Point A recorded
Rapidly Blinking Green
Several Times
Point B recorded
Rapidly Blinking Yellow Remote controller signal lost
Slowly Blinking Red Low battery level
Rapidly Blinking Red Critical low battery level
Loading ...