Loading ...
Loading ...
Loading ...
50
© 2018 DJI All Rights Reserved.
DJI Assistant 2 for MG
Congure settings of the basic parameters, copy ight records, and update aircraft and remote
controller rmware in the DJI Assistant 2 for MG software.
Installation and Launching
1. Download the DJI Assistant 2 for MG installation le from the MG-1P download page:
http://www.dji.com/mg-1p/info#downloads
2. Install the software.
3. Launch DJI Assistant 2 for MG.
Using DJI Assistant 2 for MG
Connecting the Aircraft
Connect the Micro USB port of the aircraft to your computer with a Micro USB cable. Then power on
the aircraft.
Be sure to remove the propellers before using DJI Assistant 2 for MG.
Firmware Update
A DJI account is required for rmware updates. Login with your DJI account or register for one.
Basic Settings
Congure idle speed of and test the motor.
Tools
Enter SD card mode and copy the ight record.
Connecting the Remote Controller
Connect the USB-C port of the remote controller to your computer with a USB-C cable. Then power
on the remote controller.
Firmware Update
A DJI account is required for rmware updates. Login with your DJI account or register for one.
DO NOT power off the remote controller during the update.
DO NOT perform the rmware update while the aircraft is in the air. Only carry out the
rmware update when the aircraft is on the ground.
The remote controller may become unlinked from the aircraft after the rmware update.
Relink the remote controller and aircraft if necessary.
Loading ...
Loading ...
Loading ...