Dji MG-1P

User Manual - Page 44

For MG-1P.

PDF File Manual, 57 pages, Read Online | Download pdf file

MG-1P photo
Loading ...
Loading ...
Loading ...
AGRAS MG-1P SERIES User Manual
42
© 2018 DJI All Rights Reserved.
3. Tap > , select in Home Point settings to set the remote controller’s current coordinates
as the Home Point.
4. The Aircraft Status Indicators will blink green to indicate that the new Home Point has
successfully been set.
RTH Safety Notices
The aircraft cannot avoid obstacles during RTH if the operating environment is not
suitable for the radar module. Users can only control the speed and altitude of the
aircraft. If the aircraft is in risk of collision, exit RTH immediately. Before each ight, it
is important to set an RTH altitude that is appropriate for the given environment. Go
to DJI MG > Operation View >
> > Set Return to Home Altitude.
5 m
5 m
H
RTH Altitude
If the aircraft is ying under 5 meters and RTH (including Smart and Failsafe RTH)
is triggered, the aircraft will rst automatically ascend to 5 meters from the current
altitude. You cannot control the aircraft during this ascent. In Smart RTH, you can
exit RTH to cancel automatic ascent by pressing the RTH button once.
5 m
5 m
H
RTH Altitude
The aircraft automatically descends and lands if RTH is triggered when the aircraft
ies within a 5 m radius of the Home Point.
The aircraft cannot return to the Home Point when GNSS signal is weak (
displays red) or is unavailable.
When the RTH altitude is set to more than 5 m and the aircraft is ascending between
5 m and the preset RTH altitude, the aircraft will stop ascending and immediately
return to the Home Point if you push the throttle stick.
Obstacle Avoidance During RTH
During RTH, if there is an obstacle within 20 m of the aircraft, the aircraft decelerates and then stops
and hovers. While decelerating, if the aircraft comes within 6 m of the obstacle it ies backward to
a distance of around 6 m from the obstacle and hovers. The aircraft then exits the RTH procedure
and waits for pilot commands.
Landing Protection Function
Landing Protection will activate during auto landing.
1. After the aircraft arrives at the Home Point, it will descend to a position three meters above the
ground and hover.
2. Control the pitch and roll sticks to adjust the aircraft position and ensure the ground is suitable
for landing.
3. Pull down the throttle stick or follow the onscreen instructions in the DJI MG app to land the
aircraft.
Loading ...
Loading ...
Loading ...