Dji MG-1P

User Manual - Page 49

For MG-1P.

PDF File Manual, 57 pages, Read Online | Download pdf file

MG-1P photo
Loading ...
Loading ...
Loading ...
AGRAS MG-1P SERIES User Manual
© 2018 DJI All Rights Reserved.
47
4. The Aircraft Status Indicators show the current ight mode and the calibration page disappears
in the app when calibration is complete. If the Aircraft Status Indicators blink red or a calibration
failure is displayed in the app, repeat the steps above to calibrate the compass.
When to Recalibrate
1. Compass data is abnormal, and the Aircraft Status Indicators are alternately blinking red and
yellow.
2. Flying in a new location, or a location that is different from your last ight.
3. The mechanical structure of the aircraft has changed.
4. Severe drifting occurs in ight (e.g., the aircraft has difculty ying in a straight line).
Calibrating the Spraying System
Be sure to calibrate the spraying system before your rst spray operation, or else it will adversely
affect spraying performance. Use the included measuring cup to ensure accuracy. Calibration
takes around 6 to 14 minutes.
1. Preparation before calibration: If there are any bubbles in the hoses, discharge them before
calibrating. If there are no bubbles proceed directly to calibration.
1
Fill the spray tank with about 2 L of water.
2
Power on the remote controller and the aircraft.
3
Loosen the four manual relief valves on the side of the sprinklers and press the Spray button
on the remote controller until the bubbles in the hoses have been fully discharged.* Tighten
the valves and press the Spray button to stop spraying.
* If the bubbles have still not been fully discharged after a long period of time, rotate the valve cover and
remove it, then re-mount the cover once the bubbles have been fully discharged.
2. Spraying System Calibration
1
Liquid level meter calibration
Pour about 1 L of water into the spray tank. In the DJI MG app go to Operation View >
> ,
then tap Calibrate in Flow IMU settings.
Select Nozzle Model, select the correct model in the list (the standard nozzle is model
XR11001VS), then tap Start Calibration. The aircraft will spray automatically, then when ready
the app will indicate that the aircraft is ready for left pump calibration.
Loading ...
Loading ...
Loading ...